INMT 2388:
In the event of an emergency or announced campus closure due to a natural disaster or pandemic, it may be necessary for Panola College to move to altered operations. During this time, Panola College may opt to continue delivery of instruction through methods that include, but are not limited to: online learning management system (CANVAS), online conferencing, email messaging, and/or an alternate schedule. It is the responsibility of the student to monitor Panola College's website (www.panola.edu) for instructions about continuing courses remotely, CANVAS for each class for course-specific communication, and Panola College email for important general information.
Regular and punctual attendance of classes and laboratories is required of all students. When a student has been ill or absent from class for approved extracurricular activities, he or she should be allowed, as far as possible, to make up for the missed work. If a student has not actively participated by the census date, they will be dropped by the instructor for non-attendance. This policy applies to courses that are in-person, online, hybrid, and hyflex.
Attendance in online courses is determined by submission of an assignment or participation in an activity. According to federal guidelines, simply logging into a distance learning course without participating in an academic assignment does not constitute attendance. Distance learning is defined as when a majority (more than 50%) of instruction occurs when the instructor and students are in separate physical locations. Students must engage in an academic activity prior to the course census date.
When an instructor feels that a student has been absent to such a degree as to invalidate the learning experience, the instructor may recommend to the Vice President of Instruction that the student be withdrawn from the course. Instructors may seek to withdraw students for non-attendance after they have accumulated the following number of absences:
Fall or spring semesters:
3 or more class meeting times per week - 5 absences
2 class meeting times per week - 3 absences
1 class meeting per week - 2 absences
The student is responsible for seeing that he or she has been officially withdrawn from a class. A student who stops attendance in a class without officially withdrawing from that class will be given a failing grade; consequently, the student must follow official withdrawal procedures in the Admissions/Records Office.
Please note: Health Science and Cosmetology courses may require more stringent attendance policies based on their accreditation agencies. Please see the addendum and/or program handbook for further information concerning attendance.
Panola College welcomes pregnant and parenting students as a part of the student body. This institution is committed to providing support and adaptations for a successful educational experience for pregnant and parenting students. Students experiencing a need for accommodations related to pregnancy or parenting will find a Pregnancy and Parenting Accommodations Request form in the Student Handbook or may request the form from the course instructor.
Use of generated AI Permitted under some classroom circumstances with permission.
There are situations throughout the course where you may be asked to use artificial intelligence (AI) tools to explore how they can be used. Outside of those circumstances, you should not use AI tools to generate content that will end up in any student work (assignments, activities, discussion responses, etc.). In such cases for Option #2, no more than 25% of the student work should be generated by AI. Use of any AI-generated content in this course without the instructor’s consent qualifies as academic dishonesty and violates Panola College’s standards of academic integrity.
- Demonstrate proper safety procedures of industry.
- Demonstrate proper interviewing skills and good communication with employers.
- Complete 8 weeks of in the field experience and utilize knowledge obtained in class.
- Demonstrate proper work ethic.
After studying all materials and resources presented in the course, the student will be able to:
- Demonstrate proper safety procedures of industry. (1 A-I, 1A-ii, 1Aiv, 1B-iii, 1B-iv, 1 C-I, 1C-iv, 2A-I, 2A-iii, 2B-I, 2C-i, 2C- ii, 2C-iii, 2D-ii, 2D-iii, 2E-ii)
- Obtain and maintain a perfect safety record while on the job.
- Demonstrate basic safety knowledge and attend job related safety meetings.
- Demonstrate proper interviewing skills and good communication with employer. (1 A-I, 1A-ii, 1Aiv, 1B-iii, 1B-iv, 1 C-I, 1C-iv, 2A-I, 2A-iii, 2B-I, 2C-i, 2C- ii, 2C-iii, 2D-ii, 2D-iii, 2E-ii)
- Maintain good channels of communication throughout internship experience.
- Demonstrate proper interview skills and etiquette.
- Complete 8 weeks of in the field experience and utilized knowledge obtained in class. (1 A-I, 1A-ii, 1Aiv, 1B-iii, 1B-iv, 1 C-I, 1C-iv, 2A-I, 2A-iii, 2B-I, 2C-i, 2C- ii, 2C-iii, 2D-ii, 2D-iii, 2E-ii)
- Demonstrate basic knowledge learned in the classroom and utilize it in the field with experienced employees.
- Obtain 8 weeks of work experience with weekly documentation and supervisor records and reports.
- Demonstrate proper work ethic. (1 A-I, 1A-ii, 1Aiv, 1B-iii, 1B-iv, 1 C-I, 1C-iv, 2A-I, 2A-iii, 2B-I, 2C-i, 2C- ii, 2C-iii, 2D-ii, 2D-iii, 2E-ii)
- Maintain perfect safety records
- Maintain perfect attendance records.
- Observe all company policies and chain of command.
- Be polite and helpful to any company employee absolutely no altercations will be acceptable.
- Students will be required to complete any task assigned to them as long as it will not violate company policy.
Students in all sections of this course will be required to do the following:
- Students will be required to type and submit weekly reports of job duties and training.
- Students will receive the majority of their grade from their supervisor’s review of their performance.
This course is a working internship with an industry related company. All work will be submitted through Canvas, email, mail, and Fax.
The grading scale for this course is as follows:
- Supervisors Review = 80%
- Weekly Reports = 20%
- Courses conducted via video conferencing may be recorded and shared for instructional purposes by the instructor.
- For current texts and materials, use the following link to access bookstore listings: https://www.panolacollegestore.com.
- For testing services, use the following link: https://www.panola.edu/student-services/studentsupport/academic-testing-center.
- If any student in this class has special classroom or testing needs because of a physical learning or emotional condition, please contact the ADA Student Coordinator in Support Services located in the Charles C. Matthews Student Center or go to https://www.panola.edu/studentservices/student-support/disability-support-services for more information.
- Withdrawing from a course is the student’s responsibility. Students who do not attend class and who do not withdraw will receive the grade earned for the course.
- Student Handbook: https://www.panola.edu/ (located on at the bottom under student)
- Foundation skills are defined in three areas: basic skills, thinking skills, and personal qualities.
- Basic Skills: A worker must read, write, perform arithmetic and mathematical operations, listen, and speak effectively. These skills include:
- Reading: locate, understand, and interpret written information in prose and in documents such as manuals, graphs, and schedules.
- Writing: communicate thoughts, ideas, information, and messages in writing, and create documents such as letters, directions, manuals, reports, graphs, and flow charts.
- Arithmetic and Mathematical Operations: perform basic computations and approach practical problems by choosing appropriately from a variety of mathematical techniques.
- Listening: receive, attend to, interpret, and respond to verbal messages and other cues.
- Speaking: Organize ideas and communicate orally.
- Thinking Skills: A worker must think creatively, make decisions, solve problems, visualize, know how to learn, and reason effectively. These skills include:
- Creative Thinking: generate new ideas.
- Decision Making: specify goals and constraints, generate alternatives, consider risks, and evaluate and choose the best alternative.
- Problem Solving: recognize problems and devise and implement plan of action.
- Visualize ("Seeing Things in the Mind's Eye"): organize and process symbols, pictures, graphs, objects, and other information.
- Knowing How to Learn: use efficient learning techniques to acquire and apply new knowledge and skills.
- Reasoning: discover a rule or principle underlying the relationship between two or more objects and apply it when solving a problem.
- Personal Qualities: A worker must display responsibility, self-esteem, sociability, self management, integrity, and honesty.
- Responsibility: exert a high level of effort and persevere toward goal attainment.
- Self-Esteem: believe in one's own self-worth and maintain a positive view of oneself.
- Sociability: demonstrate understanding, friendliness, adaptability, empathy, and politeness in group settings.
- Self-Management: assess oneself accurately, set personal goals, monitor progress, and exhibit self-control.
- Integrity and Honesty: choose ethical courses of action.
- Basic Skills: A worker must read, write, perform arithmetic and mathematical operations, listen, and speak effectively. These skills include:
- Workplace competencies are defined in five areas: resources, interpersonal skills, information, systems, and technology.
- Resources: A worker must identify, organize, plan, and allocate resources effectively.
- Time: select goal-relevant activities, rank them, allocate time, and prepare and follow schedules.
- Money: Use or prepare budgets, make forecasts, keep records, and make adjustments to meet objectives.
- Material and Facilities: Acquire, store, allocate, and use materials or space efficiently. Examples: construct a decision timeline chart; use computer software to plan a project; prepare a budget; conduct a cost/benefits analysis; design an RFP process; write a job description; develop a staffing plan.
- Interpersonal Skills: A worker must work with others effectively.
- Participate as a Member of a Team: contribute to group effort.
- Teach Others New Skills.
- Serve Clients/Customers: work to satisfy customer's expectations.
- Exercise Leadership: communicate ideas to justify position, persuade and convince others, responsibly challenge existing procedures and policies.
- Negotiate: work toward agreements involving exchange of resources, resolve divergent interests.
- Work with Diversity: work well with men and women from diverse backgrounds. Examples: collaborate with a group member to solve a problem; work through a group conflict situation, train a colleague; deal with a dissatisfied customer in person; select and use appropriate leadership styles; use effective delegation techniques; conduct an individual or team negotiation; demonstrate an understanding of how people from different cultural backgrounds might behave in various situations.
- Information: A worker must be able to acquire and use information.
- Acquire and Evaluate Information.
- Organize and Maintain Information.
- Interpret and Communicate Information.
- Use Computers to Process Information. Examples: research and collect data from various sources; develop a form to collect data; develop an inventory record-keeping system; produce a report using graphics; make an oral presentation using various media; use on-line computer databases to research a report; use a computer spreadsheet to develop a budget.
- Systems: A worker must understand complex interrelationships.
- Understand Systems: know how social, organizational, and technological systems work and operate effectively with them.
- Monitor and Correct Performance: distinguish trends, predict impacts on system operations, diagnose deviations in systems' performance and correct malfunctions.
- Improve or Design Systems: suggest modifications to existing systems and develop new or alternative systems to improve performance. Examples: draw and interpret an organizational chart; develop a monitoring process; choose a situation needing improvement, break it down, examine it, propose an improvement, and implement it.
- Technology: A worker must be able to work with a variety of technologies.
- Select Technology: choose procedures, tools or equipment including computers and related technologies.
- Apply Technologies to Task: understand overall intent and proper procedures for setup and operation of equipment.
- Maintain and Troubleshoot Equipment: Prevent, identify, or solve problems with equipment, including computers and other technologies. Examples: read equipment descriptions and technical specifications to select equipment to meet needs; set up and assemble appropriate equipment from instructions; read and follow directions for troubleshooting and repairing equipment.
- Resources: A worker must identify, organize, plan, and allocate resources effectively.